FlashLink Program Manager 10.xx FAQs
Why does my FlashLink Program Manager ask for a serial number when I am installing it?
FlashLink Program Manager must be purchased. The Program Manager is designed with the option for programming reusable data loggers. You must contact sales to purchase a license (serial) number before installing it.
Why do I get an Error for RDInstall.exe during the Installation on my Windows 7 64 bit machine
This is the parallel port driver for the old FlashLink drivers. It is not compatible with 64-bit operating systems.
- You can ignore this error and the installation will continue.
- If you are using old FlashLink logger you will need to use a FlashLink USB adapter
Can I install it on more than 1 Computer at a time?
No. The license is only good for 1 computer at a time.
I have a new install and it is not accessing my logger.
The port settings are not configured correctly
- If you are using an older FlashLink logger and connecting directly to the 25 pin parallel port (Note: The parallel download will only work on LPT1)
- Click on Customize > Set Port and check Enable LPT1:
- Click OK
- If you are using a FlashLink USB or CT USB Adapter
- Connect the adapter
- Go to the Device Manager and verify the COM port # the adapter is on
- Open Program Manager and click on Customize > Set Port
- Check Enable Serial Port then select the COM port 3 from the list
- Click OK
- If you are using a FlashLink USB Logger
- Connect the logger
- Open Program Manager and click on Customize > Set Port
- Check Enable USB Port
- Click OK